Influence of malocclusion on sleep bruxism and orofacial pain: data from a study in school children.

OBJECTIVES: This cross-sectional school-based study explored the influence of malocclusion on temporomandibular disorders (TMD) pain complaints, and whether this association would be mediated by sleep bruxism in a representative sample of 7- to 8-year-old children. METHODS: Path analysis estimated direct, indirect, and total effects of occlusal features on sleep bruxism and TMD pain in 7- to 8-year-old children. Occlusal features were assessed with Dental Aesthetic Index (DAI), orofacial pain complaints using the TMD pain screener, possible sleep bruxism based on self-reports, and probable sleep bruxism based on self-reports combined with clinical findings. Structural equation modeling analyzed data with confounding factors. RESULTS: From 580 participants, possible sleep bruxism was observed in 136 children (31.5%), probable sleep bruxism in 30 children (6.7%), and TMD pain complaints in 78 children (13.8%). Malocclusion had no direct effect on either possible sleep bruxism [standardized coefficient (SC) 0.000; p = 0.992], or TMD pain complaints (SC - 0.01; p = 0.740). When probable sleep bruxism was set as the mediator of interest, malocclusion did not directly affect probable sleep bruxism (SC 0.01; p = 0.766), nor TMD pain complaints (SC - 0.02; p = 0.515). A direct effect of probable sleep bruxism on TMD pain complaints was observed with an SC of 0.60 (p < 0.001). However, in neither case, malocclusion indirectly affected TMD pain complaints via bruxism. CONCLUSION: Malocclusion in 7- to 8-year-old children did not directly influence possible or probable sleep bruxism or TMD pain complaints. Instead, probable sleep bruxism was strongly associated with TMD pain complaints. CLINICAL SIGNIFICANCE: The impact of occlusal features on TMD pain complaints and bruxism has been a long-standing controversy in dentistry. However, the scientific literature linking this association may be inconsistent, mainly due to biased sample selection methods with inadequate consideration of confounders. Further research should try to identify additional risk factors for TMD pain in addition to probable sleep bruxism in children.

Effect of shade and opacity on color differences and translucency of resin composite veneers over lighter and darker substrates.

To evaluate color differences (ΔE00) and translucency parameters (TP) from mono, bi, and trilayer resin composite veneers using different opacities and shades of resin composite over lighter and darker simulated tooth-colored substrates. Mono, bi, and trilayer veneers (1.5 mm) (n = 12) were made using two shades (A1 and A2) and three opacities (enamel, body, and dentin) of resin composite over simulated lighter (A1) and darker (C4, and C4+) tooth-colored substrates. CIEDE2000 formula was used to calculate ΔE00 considering simulated tooth-colored substrate versus opacities in distinct mono, bi, and trilayer combinations of resin composite over the simulated tooth-colored substrate. The TP was calculated using color coordinates measured over standard white and black backgrounds. Differences in ΔE00 and TP values were calculated with a Three-way Analysis of Variance followed by Tukey's post-hoc test. A1E and A1B monolayer veneers showed similar TP values. Significantly higher ΔE00 values were observed over darker (C4 and C4+), and lower over lighter (A1) simulated tooth-colored substrate. Bilayer and trilayer veneers using dentin opacity provided similar ΔE00 values over the darker tooth-colored substrate. Distinct shades and opacities of resin composite layer combinations over lighter and darker tooth-colored substrates significantly affected TP and ΔE00 values. A1 shade and dentin opacity of monolayer resin composite veneers yielded higher ΔE00 values over darker tooth-colored substrates.

Functional performance and impact on the quality of life of three treatment strategies for mandibular edentulism: Results of a parallel 3-group cross-sectional study.

OBJECTIVES: This parallel cross-sectional study compared masticatory function and patient-centered outcomes among 3 removable treatment strategies for mandibular edentulism. METHODS: Thirty-six edentulous participants rehabilitated using 3 removable treatment strategies for mandibular edentulism were allocated to one of the three groups (n=12): CCD (control), 2-IMO, and 3-IMO. Narrow diameter implants were installed using single-stage surgery and conventionally loaded with stud abutments. After 3 months of usage, the quality of life, maximum bite force, and masticatory function were evaluated. Data were analyzed with the Kruskal-Wallis test and post hoc pairwise Mann-Whitney tests with Bonferroni correction (α=0.05). RESULTS: The 2-IMO and 3-IMO wearers did not show significant differences in any outcome, except for the 2 domains of 3-IMO wearers quality of life that obtained better Pain and General Performance scores. Both IMO groups presented significantly higher maximum bite force than CCD wearers. The 2-IMO wearers showed superior outcomes to the CCD group in all outcomes of the masticatory performance test and the X50, B and ME5.6 outcomes of the swallowing threshold test (p = 0.01), while 3-IMO participants only showed superior masticatory performance in terms of lower X50 values (19.86%, p = 0.02) and higher ME 2.8 (141.15%, p = 0.04) than CCD wearers. CONCLUSIONS: Compared to 2-IMO wearers, 3-IMO wearers report superior impact of treatment on daily living activities in the Pain and General Performance domains. 2-IMO and 3-IMO wearers showed no significant differences between them for all evaluated bite force and masticatory function parameters. CLINICAL SIGNIFICANCE: Although overdentures retained by 3 implants (3-IMO) provide biomechanical advantages over those retained by 2 implants (2-IMO), superior clinical and functional effectiveness is not yet proven.

Validity of self-reported oral conditions among Brazilian older women: Do socio-economic factors matter?

OBJECTIVE: To validate the level of agreement between self-report and clinical examination for oral conditions and evaluate the effect of sociodemographic conditions on the validity of self-report among women aged 60 and older. METHODS: A cross-sectional study was conducted in a social community center for seniors in Southern Brazil. Sociodemographic data (age, level of education, and income) were measured. Participants were interviewed and clinically examined for the number of teeth (DMF-T index) and the use of dental prostheses. The self-reported number of teeth in each arch and the use of dental prostheses were gathered through interviews. The level of agreement was estimated using the observed agreement, Kappa statistics, sensitivity/specificity (edentulism/prostheses) and Lin's concordance correlation coefficient, and related tests (number of teeth). The validity of the oral conditions was estimated according to sociodemographic information. RESULTS: Ninety-nine women participated in the study. High levels of agreement were observed for edentulism (97.8%; 95%CI 92.8;99.7; Kappa 0.947) and the use of dental prostheses (97.0%; 95%CI 91.3;99.4; Kappa 0.922). In both conditions, despite achieving similar concordance correlation coefficients (ranging from weak to moderate), the mean number of upper teeth was lower in clinical examination (7.1 ± 5.2) compared with self-reported (8.6 ± 3.6), while the opposite was observed for lower teeth (clinical examination: 9.1 ± 3.4; self-reported: 6.6 ± 5.3). Larger differences were found among women of low income and educational levels. CONCLUSIONS: Our findings suggest that the participants' socio-economic position might influence their self-reported number of teeth.

Agreement between self-rated denture condition and clinical examination in older adults.

OBJECTIVES: This study aimed to compare differences between complete denture conditions self-rated by older adult wearers and clinically exanimated by a professional based on standardised aesthetics and functional criteria. MATERIALS AND METHODS: Complete denture clinical examination was based on the functional (stability, retention, occlusion and articulation, vertical dimension of occlusion) and aesthetics criteria. Data on self-rated complete denture conditions were measured using the Patient's Denture Assessment (PDA) questionnaire based on standardised aesthetic and functional criteria (n = 122). Prevalence rates of clinical and self-rated complete denture condition, sensitivity, specificity, positive and negative predictive values, and absolute and relative bias were calculated. RESULTS: The highest sensitivity (66.7% [95% CI 55.3-76.7]) was obtained for aesthetic criterion, whereas occlusion revealed the lowest sensitivity (14.9% [95% CI 6.2-28.3]). Stability had the highest specificity (91.3% [95% CI 72.0-98.9]) and aesthetics the lowest (21.4% [95% CI 8.3-41.0]). Stability also yielded the highest positive predictive value (83.3% [95% CI 51.6-97.9]), and vertical dimension of occlusion the lowest (26.3% [95% CI 9.1-51.2]). The vertical dimension of occlusion yielded the highest negative predictive value (71.2% [95% CI 58.7-81.7]). Self-rated data underestimated the complete denture condition in 6.5% compared with clinical examinations when the aesthetic criterion was excluded from the analysis and 7.6% when added. CONCLUSIONS: Older adult wearers better identified the condition of their complete denture when the aesthetic criterion was excluded from examination. In contrast, considering functional criteria (retention, stability, occlusion and vertical dimension of occlusion), self-rated complete denture conditions underestimated clinical examination. CLINICAL RELEVANCE: Using standardised aesthetic criteria in epidemiological studies for assessing complete denture conditions self-rated by wearers could avoid underestimating or overestimating the information regarding the use or need for dental prostheses.

Daily screen time, sleep pattern, and probable sleep bruxism in children: A cross-sectional study.

OBJECTIVE: This study aimed to evaluate the prevalence of probable sleep bruxism (SB) in children aged 7-8 years and its association with sleep pattern and the time spent using devices with a screen. MATERIAL AND METHODS: A cross-sectional study was conducted with children from Pelotas, Brazil (n = 556). Parents/caregivers were interviewed and provided demographic/socioeconomic information, children's daily screen time, nighttime tooth grinding or clenching, sleep duration and answered the Biological Rhythms Interview for Assessment in Neuropsychiatry for Kids (BRIAN-K-sleep domain). Probable SB was determined based on a positive clinical inspection with/without a positive parental/caregiver's reports of tooth clenching or grinding. Hierarchical Poisson regression was performed. RESULTS: The prevalence of probable SB was 15.83% (n = 88). There was no difference in the probable SB prevalence according to the daily screen time (p = 0.744), and low family socioeconomic status was associated with higher SB prevalence (Prevalence Ratio [PR] = 1.95; 95% Confidence Interval [95% CI]: 1.21-3.17; p = 0.006). Higher scores in the sleep domain of the BRIAN-K scale were associated with probable SB [PR = 1.07; 95% CI: 1.01-1.30; p = 0.013]. CONCLUSIONS: Difficulties in maintaining sleep and low family socioeconomic status were associated with probable SB in schoolchildren, while screen time spent using devices with a screen was not associated.

Sleep-related factors and orofacial pain symptoms associated with rhythmic masticatory muscle activity frequency scored by polysomnography recordings: A case-control study.

OBJECTIVE: This study aimed to evaluate the influence of the frequency of rhythmic masticatory muscle activity per hour (RMMA/h) scored by polysomnography (PSG) recordings on sleep-related factors and orofacial pain symptoms. METHODS: According to RMMA/h frequency, participants were assigned either to the control group (i.e., CRMMA, n = 40); or the case group according to high (i.e., HRMMA, n = 12) or low (LRMMA, n = 28) RMMA/h frequency. Fisher's exact (nominal variables), One-way Analysis of Variance followed by post-hoc Tukey (continuous variables) and Poisson Regression tests were used to calculate orofacial pain symptoms and sleep-related breathing, behavior, and architecture differences between controls versus cases at a significance level of 5%. RESULTS: The CRMMA differed from HRMMA and LRMMA subgroups considering orofacial pain, self-reported tooth clenching or grinding, obstructive sleep apnea (OSA), snoring, and most variables considering sleep architecture (P ≤ 0.05). Multivariate adjusted Poisson regression analysis revealed that bruxers, regardless of RMMA/h frequency, presented a significantly higher prevalence rate (PR) related to orofacial pain (PR 1.68; P = 0.025) and self-reported behavior (PR 1.71; P = 0.012). CONCLUSION: Significant differences in N1, N2 and N3 stages, arousals, arousal per hour, and sleep onset latency variables were found comparing bruxer with high or low RMMA/h frequency. Compared to controls, bruxers presented higher PR related to headache and self-reported tooth clenching or grinding.

Sleep Bruxism in Puerperal Women: Data from a Population-Based Survey.

OBJECTIVE: To evaluate the self-reported SB prevalence and explore associated risk factors in puerperal women who had given birth in Rio Grande, Southern Brazil. METHODS: A single, standardized questionnaire was given within the 48 h postpartum period. Self-reported SB was the main outcome investigated. Chi-square test was used to compare proportions, and Poisson regression with robust variance adjustment was used in the multivariate analysis. RESULTS: A total of 2225 women were included. Only 79 (3.6%) of these reported clenching or grinding their teeth during sleep. Adjusted analysis showed that the higher education level of the mothers (PR = 3.07; 95% CI 1.49-6.28; P = 0.006); living with three or more persons in the household (PR = 0.54; 95% CI 0.34-0.84; P = 0.007); medication intake during pregnancy (PR = 1.68; 95% CI 1.09-2.58; P = 0.017); smoking (PR = 1.93; 1.16-3.23; P = 0.024), or ever smoked (PR = 1.82; 95% CI 0.85-3.90; P = 0.024); severe anxiety (PR = 1.36; 95% CI 0.61-3.02; P = 0.005); and headache upon waking (PR = 4.19; 95% CI 1.95-9.00; P < 0.001) were significantly associated with self-reported SB. CONCLUSION FOR PRACTICE: Our data pointed towards new factors in a specific group of women that may be relevant for preventing sleep-related behaviors in the pregnancy-puerperal cycle. The higher levels of education, medication intake, smoking or even smoked, severe anxiety, the higher the probability of puerperal woman to self-report SB. The nighttime tooth clenching strongly increased headache upon waking.

Temporomandibular joint involvement in individuals with ankylosing spondylitis: A scoping review.

OBJECTIVE: This scoping review aimed to identify the signs and symptoms of temporomandibular joint (TMJ) involvement in individuals with ankylosing spondylitis (AS). DESIGN: Systematic literature searches were performed on PubMed, Embase, and Web of Science databases (up to April 2022). Studies with signs and symptoms of temporomandibular joint disorder (TMD) in adults with AS were included. TMJ outcomes were extracted and analyzed qualitatively. RESULTS: From 527 potentially eligible studies, 22 were included. A total of 4309 individuals with AS were evaluated, aged between 18 and 80 years, being males approximately 65% of the sample. Signs and symptoms of pain, tenderness to palpation on TMJ and masticatory muscles, joint noises (i.e., clicking or crepitus), limited mouth opening, disc displacement, and radiographic changes were often observed. CONCLUSION: The available evidence shows that different signs and symptoms of TMD co-occur with AS disease, with a higher prevalence of TMD observed in individuals with AS than in individuals without AS. Indeed, it seems that individuals suffering from AS disease have an increased risk of developing TMD.

Effect of standardized training in combination with masseter sensitization on corticomotor excitability in bruxer and control individuals: a proof of concept study.

Recently, it has been proposed that bruxism could represent an overlearned behavior due to the absence of corticomotor plasticity following a relevant tooth-clenching task (TCT). This study assessed the modulatory effects of a nerve growth factor (NGF) injection on masseter muscle corticomotor excitability, jaw motor performance, pain, and limitation in bruxer and control participants following a TCT. Participants characterized as definitive bruxers or controls were randomly assigned to have injected into the right masseter muscle either NGF or isotonic saline (IS), resulting in a study with 4 arms: IS_Control (n = 7), IS_Bruxer (n = 7); NGF_Control (n = 6), and NGF_Bruxer (n = 8). The primary outcome was the masseter motor evoked potential (MEP) amplitude measured at baseline and after a TCT. After the interventions, significantly higher and lower MEP amplitude and corticomotor map area were observed, respectively, in the IS_Control and NGF_Control groups (P < 0.05). Precision and accuracy depended on the series and target force level with significant between-group differences (P < 0.01). NGF-induced masseter muscle sensitization, in combination with a training-induced effect, can significantly impact the corticomotor excitability of the masseter muscle in control participants indicating substantial changes in corticomotor excitability, which are not observed in bruxers. These preliminary findings may have therapeuthic implications for the potential to "detrain" and manage bruxism, but further studies with larger sample sizes will be needed to test this new concept.

Effect of preheated composite resin luting agents on the color of ceramic laminates.

This in vitro study evaluated the effects of preheating, ultrasound application, and composite resin luting agent composition on the optical characteristics of feldspar ceramic laminates. The hypothesis was that the optical properties of the ceramic-luting agent-substrate unit would be affected by the composition of the luting material and use of ultrasound. Preheated restorative composite resins Charisma, IPS Empress Direct, and Filtek Z350 were used, with unheated RelyX Veneer resin cement serving as the control. The response variables for the physical properties of the materials were degree of conversion (n = 3 per material) and viscosity (n = 3 per material). Seven groups were generated based on the tested luting agent and the use of ultrasound. Color parameters were evaluated with a spectrophotometer at 3 timepoints (before luting [baseline], 24 hours after luting, and 1 month after luting), and color change was calculated according to the Commission Internationale de l'Eclairage (CIE) CIEDE 2000 formula and translucency parameters. The statistical significance of color change and viscosity was measured using 2-way analysis of variance (ANOVA), while the degree of conversion was measured using 1-way ANOVA. For translucency parameters, ANOVA on ranks and post hoc Duncan multiple range tests were performed. The control group showed the highest degree of conversion, while Filtek Z350 showed the highest viscosity. Statistically significant differences in color change between luting material groups were found under most conditions (P < 0.001), but there was no difference in translucency parameters between the luting materials (P = 0.446). Overall, the use of preheated composite resins as luting agents offers similar to poorer performance than conventional resin cement.

Impact of oral motor task training on corticomotor pathways and diadochokinetic rates in young healthy participants.

BACKGROUND: Studies addressing the training-induced neuroplasticity and interrelationships of the lip, masseter, and tongue motor representations in the human motor cortex using single syllable repetition are lacking. OBJECTIVE: This study investigated the impact of a repeated training in a novel PaTaKa diadochokinetic (DDK) orofacial motor task (OMT) on corticomotor control of the lips, masseter, and tongue muscles in young healthy participants. METHODS: A total of 22 young healthy volunteers performed 3 consecutive days of training in an OMT. Transcranial magnetic stimulation was applied to elicit motor evoked potentials (MEPs) from the lip, masseter, tongue, and first dorsal interosseous (FDI, internal control) muscles. MEPs were assessed by stimulus-response curves and corticomotor mapping at baseline and after OMT. The DDK rate from PaTaKa single syllable repetition and numeric rating scale (NRS) scores were also obtained at baseline and immediately after each OMT. Repeated-measures analysis of variance was used to detect differences at a significance level of 5%. RESULTS: There was a significant effect of OMT and stimulus intensity on the lips, masseter, and tongue MEPs compared to baseline (p < .001), but not FDI MEPs (p > .05). OMT increased corticomotor topographic maps area (p < .001), and DDK rates (p < .01). CONCLUSION: Our findings suggest that 3 consecutive days of a repeated PaTaKa training in an OMT can induce neuroplastic changes in the corticomotor pathways of orofacial muscles, and it may be related to mechanisms underlying the improvement of orofacial fine motor skills due to short-term training. The clinical utility should now be investigated.

Effect of ultrasound on preheated resin composites used as ceramic luting agents.

This study investigated the effect of ultrasound application when luting ceramic using two preheated composites that show distinct responses to preheating at 69°C: Filtek Z100 and Z350XT. RelyX Veneer was the control. Feldspar disks were luted using the resin-based luting agents (RBLAs), and ultrasound was tested. Biaxial flexure strength (σbf) was calculated at z-axial positions of the luted disks (z=0; z=-t2). Microtensile bond strength (µTBS) to ceramic was tested (n=30). Data were analyzed at α=0.05. At z=0, the σbf was higher for Z350 when ultrasound was not used. When ultrasound was applied, the σbf was similar between Z350 and Z100. At z=-t2, differences across the RBLAs were observed: Z350 was superior than Z100 and control without ultrasound. Ultrasound increased σbf for Z100 at both axial positions. The preheated composites yielded higher µTBS than the control. Ultrasonication increased the mechanical performance of ceramic luted with Z100 without influencing the film thickness.

Invasive surgical procedures for the management of internal derangement of the temporomandibular joint: a systematic review and meta-analysis regarding the effects on pain and jaw mobility.

OBJECTIVES: This systematic review compared minimally and invasive surgical procedures to manage arthrogenous temporomandibular joint (TMJ). MATERIALS AND METHODS: The review included clinical trials assessing surgical procedures of arthrogenous temporomandibular disorder (TMD) management by carrying out comparisons within the same surgical procedure (pre- and post-treatment) as well as between different surgical procedures. Meta-analyses were conducted only for similar comparison reporting the same outcome measures, visual analog scale (VAS) values to evaluate pain and maximum incisal opening (MIO) values. RESULTS: Of the 1,015 studies identified by the search strategy, 26 were selected for full-text reading, and 19 were included in the review. Of these, 16 studies were included in the meta-analysis and 3 in the qualitative analysis. The VAS scores showed significantly lower values after discectomies (p < 0.001) and discoplasties (p < 0.001) in the within-group comparison. Moreover, significantly lower VAS scores and higher MIO values were observed after discectomy compared to arthroscopy, eminectomy, and discoplasty (p < 0.05). CONCLUSION: The findings of this systematic review suggest that although significantly lower VAS scores and higher MIO values were observed after discectomy, the currently available scientific evidence is unclear, and the use of invasive surgical procedures should not be implemented as an efficient first-line treatment option for arthrogenous TMD management. CLINICAL SIGNIFICANCE: VAS and MIO outcomes could be insufficient to describe the success or failure of open surgical procedures like discectomy and discoplasty.

A systematic review and meta-analysis on using preheated resin composites as luting agents for indirect restorations.

OBJECTIVES: This systematic review investigated the hypothesis that preheated resin composites (RCs) used as luting agents improve the mechanical properties, physicochemical performance, and color of indirect ceramic restorations. MATERIALS AND METHODS: Literature search was performed in three databases (Medline/PubMed, Scopus, and Web of Science) and in the grey literature (OpenGrey, ProQuest, and Catalog of Theses & Dissertations from CAPES). Eligibility criteria included only studies comparing at least one preheated RC used as a luting agent with resin cements. RESULTS: Data regarding the mechanical properties, physicochemical characteristics, and color were analyzed qualitatively, and the microtensile bond strength and film thickness were also evaluated by meta-analysis. The search strategy identified 3894 papers, and 28 were full-text screened. Seven studies were included in the review, and 5 were included in the meta-analysis. No significant difference was found for microtensile bond strength (P = 0.14). Preheated RCs showed significantly higher film thickness than resin cements (P = 0.001). CONCLUSION: Overall, the use of preheated RCs as luting agents offers similar to poorer performance than using resin cements for bonding indirect restorations. CLINICAL RELEVANCE: Despite the claim that preheated RC could be used as a luting agent, further studies should investigate the effect of clinically unacceptable film thickness.

Is bruxism associated with changes in neural pathways? A systematic review and meta-analysis of clinical studies using neurophysiological techniques.

This study aimed to systematically review the literature to identify clinical studies assessing neuroplasticity changes induced by or associated with bruxism or a tooth-clenching task using neurophysiological techniques. Searches were performed in five electronic databases (PubMed, EMBASE, Scopus, Web of Science, and Google Scholar) in April 2020. This review included clinical studies using neurophysiological techniques to assess neuroplasticity changes in healthy participants before and after a tooth-clenching task or comparing bruxers and non-bruxers. The quality assessment was performed with the Joanna Briggs Institute tool and Grading of Recommendations Assessment, Development, and Evaluation. Meta-analyses were conducted with studies reporting similar comparisons regarding masseter motor evoked potential amplitude and signal change outcomes. Of 151 articles identified in the searches, nine were included, and five proceeded to meta-analysis. Included studies presented moderate to very low methodological quality. From these included studies, eight evaluated bruxers and non-bruxers, of which five of them observed brain activity differences between groups, and three found no differences. Even so, all studies have suggested distinct difference in the central excitability between bruxers and non-bruxers, the meta-analysis revealed no statistically significant differences (P > 0.05). It appears that bruxism seems, indeed, to be associated with distinct differences in the neural pathways related to the control of the jaw-closing muscles, but that considerable variability in terms of classification of bruxism and assessment of neuroplasticity hamper a definite conclusion. Future research projects should take these concerns into consideration in order to further the understanding of bruxism physiology and pathophysiology.

Role of occlusal factors on probable bruxism and orofacial pain: Data from the 1982 Pelotas birth cohort study.

OBJECTIVES: This study aimed to explore the association between occlusal features and temporomandibular disorder (TMD) pain complaints and probable awake or sleep bruxism METHODS: Path analysis was used to estimate direct, indirect and total effects of occlusal features on probable bruxism and pain-related TMD in adults aged 31 years from the 1982 Pelotas Birth Cohort. A total of 539 cohort members had an oral examination in 2013. Occlusal features were assessed through the Dental Aesthetic Index (DAI), orofacial pain complaints through the TMD pain screener and probable bruxism based on self-reports in combination with clinical findings. RESULTS: Malocclusions were found in 28.8% of the participants, while awake bruxism was reported in 35.2%, sleep bruxism in 15.2%, and pain-related TMD in 52.5% of the sample. Occlusion had no direct effect on either awake bruxism [standardized coefficient (SC) -0.002; p = 0.995] or pain-related TMD (SC -0.06; p = 0.115). Conversely, probable awake bruxism was associated with pain-related TMD (SC 0.35; p < 0.001). Similar results were found when sleep bruxism was set as the mediator of interest, as malocclusion did not directly affect sleep bruxism (SC 0.05; p= 0.220) nor pain-related TMD (SC -0.06; p = 0.167). A direct effect of sleep bruxism on pain-related TMD was observed with an SC of 0.16 (p < 0.001). CONCLUSION: Our findings suggested that malocclusion during adulthood did not directly influence probable awake or sleep bruxism nor TMD pain complaints. Instead, probable awake and sleep bruxism was associated with TMD pain complaints. CLINICAL SIGNIFICANCE: Malocclusion did not impact the presence of bruxism nor TMD complaints in adulthood, but awake and sleep bruxism were associated with TMD pain complaints. The significance of malocclusion should be reconsidered in contemporary dentistry and oral rehabilitation.

Influence of feldspar ceramic thickness on the properties of resin cements and restorative set.

This in vitro study evaluated the influence of feldspathic ceramic thickness on the properties of light- and dual-cured resin cements. For each cement (RelyX Veneer, Allcem Veneer, RelyX Ultimate, and Allcem Dual), three ceramic specimens were prepared, with seven thicknesses for each (0.5, 1.0, 1.5, 2.0, 2.5, 3.0, and 3.5 mm). The degree of conversion, Vickers microhardness, irradiance power, color variation (ΔE00 ), and translucency parameters were assessed. Microhardness and irradiance power were analyzed using analysis of variance (ANOVA) with post hoc Tukey's test, while ΔE00 , translucency parameters, and degree of conversion were analyzed using ANOVA of ranks with post hoc Duncan's Multiple Range Test. The relationship between each of the dependent variables (degree of conversion, ΔE00 , and translucency parameter tests) and the specimen thickness was described using linear regression for each of the four resin cements. The significance level for all analyses was set at 5%. RelyX Ultimate yielded the lowest degree of conversion values among all resin cements. Allcem Veneer produced the lowest microhardness values, without statistical differences between thicknesses, of up to 1 mm. Allcem Dual produced the highest ΔE00 and translucency parameter values. Feldspathic ceramic thickness influenced the mechanical properties of resin cements and optical aspects of the restorative set.

Multidisciplinary Approach for Reestablishing Function and Aesthetic of Unilateral Cleft Lip Defect: A Case Report.

Cleft lip and/or cleft palate defects often result in a functional deficiency in the patient's chewing, speech ability, and aesthetic appearance, usually demanding multidisciplinary effort for addressing the aesthetic and functional patient's requirements. This clinical report describes the planned oral rehabilitation of a 46-year-old woman with unilateral cleft lip defect based on the patient's peculiarities and age. Due to limitations concerning bone grafts and implant procedures, as well as orthodontic treatment, the prosthodontic rehabilitation using the metal-ceramic fixed partial denture was chosen. The treatment adequately reestablished the aesthetic and functional activities, positively impacting the patient's quality of life.